zaterdag 17 mei 2014
woensdag 14 mei 2014
maandag 12 mei 2014
Video's
Assembly video
https://www.youtube.com/watch?v=vOsLFJYo-Mo&feature=youtu.be
Cookie Machine in Action
https://www.youtube.com/watch?v=meD9YJ7P-JY&feature=youtu.be
https://www.youtube.com/watch?v=vOsLFJYo-Mo&feature=youtu.be
Cookie Machine in Action
https://www.youtube.com/watch?v=meD9YJ7P-JY&feature=youtu.be
vrijdag 9 mei 2014
donderdag 8 mei 2014
woensdag 7 mei 2014
Prototype 44
Practical
Addaption of Prototype 43Focus: preventing the tube from being deformed when wheel collar is tightened
Duration: 15 min
Materials: aluminium tube + prototype 43
Principle: putting a smaller tube inside the big tube for strenght
Prototype:
Photo's
dinsdag 6 mei 2014
Prototype 43
Practical
Addaption of Prototype 35Focus: making the bending gaps smaller to prevent cookies from getting stuck
Duration: 15 min
Materials: ABS 4 mm + parts of prototype 35
Principle: cutting simple lines through the material instead of cutting out rectangles
Prototype:
Photo's & Video's
ABS not fully cutted through on the inside because we used a laser setting for 3 mm ABS instead of 4 mm
outside of cookie machine with cutted lines for bending
The sandpaper has to much grip on the elastic band doesn't release on time.
video shows that elastic band doesn't turn properly
Prototype 42
Practical
Testing with prototype 41
Focus: user test
Duration: 30 min
Materials: prototype 41
Principle: testing details: resistance test, dimension test
Prototype:
Testing with prototype 41
Focus: user test
Duration: 30 min
Materials: prototype 41
Principle: testing details: resistance test, dimension test
Prototype:
Photo's & Video's
The meaning of the visit was to test if the cookie machine fits on the place on the photo. The machine can be placed there but then we have to make the tube longer so Luc can reach the turning wheel, or the machine can be placed on the place where the old machine is placed now.
Luc was able to turn the wheel due the tension of the elastic band, he said it was no problem for him to turn the wheel.
Prototype 41
Practical
Based on: prototype 39
Focus: testing good manner to attach turning wheel on aluminium tube
Duration: 20 min
Materials: PMMA + aluminium tube + wheel collar
Principle: making cut in aluminium tube and a little extra material in whole of turning wheel
Prototype:
Based on: prototype 39
Focus: testing good manner to attach turning wheel on aluminium tube
Duration: 20 min
Materials: PMMA + aluminium tube + wheel collar
Principle: making cut in aluminium tube and a little extra material in whole of turning wheel
Prototype:
Photo's
Abonneren op:
Posts (Atom)